The Arctic IHW heat units are particularly suitable for projects where limited installation space is of great importance. The Arctic IHW can be projected into homes or apartments that are connected to a central heat distribution network. The AquaHeat heat unit of the Arctic DP-120 type, is the starting model of the entire AquaHeat Arctic series. The excellent performance of this type is the quality basis of all other Arctic models. In principle, all AquaHeat heating units have the same objectives:
* preparing hot tap water
* Reducing primary pressure difference
* Registering purchased energy.
The AquaHeat units are used in new construction and renovation projects that are connected to a central heat distribution network per complex, block or district.
Some specific characteristics are:
* suitable for primary supply temperature of 65°C
* Advanced electronic control for very high hot water comfort
* No moving parts in tap water circuit and therefore very low pressure loss
* Double wall plate heat exchanger with KIWA approval
* Advances adjustable keep warm function
* Beautiful EPP insulation box for extremely low downtime losses
* Compact design
* Worthy materials. The AquaHeat heat unit of the Arctic DP-520 type, is the starting model of the entire AquaHeat Arctic series. The excellent performance of this type is the quality basis of all other Arctic models. In principle, all AquaHeat heat units have the same objectives:
Preparation of hot water
Reduction of primary pressure difference
Registering purchased energy
The AquaHeat heat units are used in new construction and renovation projects, which are connected to a central heat distribution network per complex, block or district.
Some specific characteristics are:
Suitable for primary supply temperature of> 65 ° C
Advanced electronic control for a very high hot water comfort.
No moving parts in tap water circuit and therefore very low pressure loss.
Double-walled plate heat exchanger with Kiwa approval.
Advanced keep warm function adjustable.
Beautiful EPP insulation box for extremely low downtime losses
Compact design with high-quality materials
Door de drukverschilregelaar met instelbare flowbegrenzing is de belasting van het leidingnetwerk zeer efficiënt. Hierdoor kan in veel gevallen bij renovatieprojecten gebruik gemaakt worden van het bestaande leidingnetwerk. De Arctic DPF-120 kan worden geprojecteerd in woningen of appartementen die zijn aangesloten op een centraal warmte-distributienet.
Drukverschilregelaar met instelbare flowbegrenzing
Geschikt voor primaire aanvoer temperatuur van > 65°C
De warmte-units type Arctic DPF-520 zijn in bijzonder geschikt voor projecten waarbij beperkte opstellingsruimte van groot belang is. Door de drukverschilregelaar met instelbare flowbegrenzing is de belasting van het leidingnetwerk zeer efficiënt. Hierdoor kan in veel gevallen bij renovatieprojecten gebruik gemaakt worden van het bestaande leidingnetwerk. De Arctic DPF-520 kan worden geprojecteerd in woningen of appartementen die zijn aangesloten op een centraal warmte-distributienet.
eventueel nog tekst
Drukverschilregelaar met instelbare flowbegrenzing.
Geschikt voor primaire aanvoer temperatuur van > 65°C
AquaHeat Arctic DP-120VK
The AquaHeat heating unit of the Arctic DP-120VK type, has been specially designed for smaller networks and is equipped with a 100% priority switch on hot tap water. This contributes to the prevention of a too high simultaneity (network load) of the installation. This model has excellent performance.
The basic functions of the Arctic DP-120VK are:
Preparation of hot water
Reduction of primary pressure difference
Registering purchased energy
100% priority switching on hot tap water
Electronically controlled zone valve for the secondary installation
The AquaHeat heat units are used in new construction and renovation projects, which are connected to a central heat distribution network per complex, block, or district.
Some specific characteristics are:
Suitable for primary supply temperature of> 65 ° C
Advanced electronic control for a very high hot water comfort
No moving parts in tap water circuit and therefore very low pressure loss
Double-walled plate heat exchanger with Kiwa approval
Advanced keep warm function adjustable
Beautiful EPP insulation box for extremely low downtime losses
Compact design with high-quality materials
AquaHeat Arctic DP-520VK
The AquaHeat heating unit of the Arctic DP-520VK type is specially designed for smaller networks and is equipped with a 100% priority switch on hot tap water. This contributes to the prevention of a too high simultaneity (network load) of the installation. This model has excellent performance.
The basic functions of the Arctic DP-520VK are:
Preparation of hot water
Reduction of primary pressure difference
Registering purchased energy
100% priority switching on hot tap water
Electronically controlled zone valve for the secondary installation
The AquaHeat heat units are used in new construction and renovation projects, which are connected to a central heat distribution network per complex, block, or district.
Some specific characteristics are:
Suitable for primary supply temperature of> 65 ° C
Advanced electronic control for a very high hot water comfort
No moving parts in tap water circuit and therefore very low pressure loss
Double-walled plate heat exchanger with Kiwa approval
Advanced keep warm function adjustable
Beautiful EPP insulation box for extremely low downtime losses
Compact design with high-quality materials
Door de drukverschilregelaar met instelbare flowbegrenzing en de voorrangschakeling op warmwater bedrijf is de belasting van het leidingnetwerk zeer efficiënt. Hierdoor kan in veel gevallen bij renovatieprojecten gebruik gemaakt worden van het bestaande leidingnetwerk. De Arctic DPF-120VK kan worden geprojecteerd in woningen of appartementen die zijn aangesloten op een centraal warmte-distributienet
Tekst.
Drukverschilregelaar met instelbare flowbegrenzing.
100% voorkeurschakeling op warmtapwater.
De warmte-units type Arctic DPF-520VK zijn in bijzonder geschikt voor projecten waarbij beperkte opstellingsruimte van groot belang is. Door de drukverschilregelaar met instelbare flowbegrenzing en de voorrangschakeling op warmwater bedrijf is de belasting van het leidingnetwerk zeer efficiënt. Hierdoor kan in veel gevallen bij renovatieprojecten gebruik gemaakt worden van het bestaande leidingnetwerk. De Arctic DPF-520VK kan worden geprojecteerd in woningen of appartementen die zijn aangesloten op een centraal warmte-distributienet.
Tekst.
